選【角鋼切角機】就來山東找【天都數控】品質有保證！

產品詳情 價格：麵議 最小采購量：1 品牌/型號：瑞浦/JGQJ-14 JGQJ-20 重量：1（kg） 產品介紹 液壓角鋼切角機的詳細信息 品牌/型號：瑞浦/JGQJ-14 JGQJ-20 重量：1（kg） 組合機床類型：其他 液壓角鋼切角機 本機為開式角鋼切角、角鋼及鋼板打字、衝孔多用機，主要用於角鋼的切角及打字、衝孔，鋼板的打字、衝孔。 本機的切角模為直角雙刃口、回轉式（手動或電動）多方位切角模、角鋼所需切角度的變化，隻需調整回轉工架即可，而角負有需要轉動角度，因此其切角作業占地麵積小，切角誤差小；本機還具有要字及衝孔係統，若需要打字、衝孔，隻要卸下切角模，換上打字或衝孔係統，就可進行打字或衝孔作業。（衝孔模可配單孔、雙孔徑和多孔徑模具）。 This is an open type all-purpose machine for corner cutting of angle steel, angling, print on the armor plate and punching. It is mainly used for corner cutting, print and punching of angle steel, and the print and punching of armor plate. The corner cutting model of this machine is right-angle double-edged, helicoids (manual or electric) all-orientation. It is possible to adjust the helicoids model to meet the change of the cutting angle of the angle steel, ad the angle steel doesn’t need to turn. So the floor space of the corner cutting processing is small, and corner cutting error is little. This machine also possesses the print and punching system. When print and punching are needed, it can be carried through to take down the corner cutting model and fix the print and punching system.(punching model can be collocated with haplopore, diplopore and multiorifice diameter model). 序號Sequence number項目名稱 Item name單位UnitJGQJ-14規格 StandardJGQJ -20規格 Standard1壓機公稱壓力Presser nominal pressureKN80010002油缸行程Oil cylinder strokeMm50503行程次數Times of strokeMin-120-2520-254電機功率Power of electric machineryKW11155可切最角鋼邊長、厚度 Max side length and thickness of sectile angle steelmm140×140×12（單切口）Single-notch200×200×16（單切口）Single-notch6切角模回轉角度Turning angle of the corner cutting model ±360°±360°